Technical Data
Input Data
Measuring ranges : 10 mbar to 600 bar
Overload pressures : 1.5 times FSR
Tightening torque : 20 Nm
Mechanical connection : Threaded port 1/2″ BSPM
(other options available)
Parts in contact with medium : Stainless steel (other
options available.)
Supply voltage : 18 .. 32 V DC
Current consumption : approx. 200 mA
Residual ripple of supply voltage : ≤ 10 %
Electrical connection : 19-pole, circular MIL
connector
Note : Reverse polarity protection of the supply
voltage, excess voltage, override and short circuit
protection are provided.
Output Data
Accuracy : ≤ ± 0.25 % FS max.
Repeatability : ≤ ± 0.1 % FS max.
Temperature drift : ≤ ± 0.03 % FS / °C max. zero point
& range
Analogue output : 4 .. 20 mA ohmic resistance ≤ 400 Ohms
0 .. 10 V ohmic resistance ≥ 2 kOhms
Switch Outputs
Type : 4 hermetically sealed SPDT relays with
change-over contacts (independent potential free
contacts)
Switching voltage and current : 5 A, 250 VAC /
5 A, 30 VDC
Switching capacity : max. 1250 W / 1250 VA (for
inductive load, use varistors)
Switching cycles : 1 million at minimum load
0.1 million at maximum load
Reaction time : < 20 ms
Environmental Conditions
Operating temperature range : -25 .. +60 °C
Storage temperature range : -40 .. +80 °C
Fluid temperature range : -25 .. +80 °C
(Also generally complies with EN 50178, Tab. 7, Type
C, Class 4K4H Operation, 1K4 Storage, 1K3 Transport)
Protection class : IP 66
Other Data
Display : Full colour OLED display
Housing material : Stainless Steel case
Weight : ~ 800 g (noted for popular pressure gauge
device type, varies with models)
